BriteHue Orange Envelopes - A7 (5 1/4 x 7 1/4) 60 lb Text Semi-Vellum 30% Recycled 250 per Box
Envelope printing services are available when viewing this page on a desktop computer
About Envelope Addressing
Address your envelopes for any occassion or event can be a hassle, but we've made it easy. Simply select 'Add Your Address List' and Upload your address list or create a new one using our online tools.
You'll have options to:
- Format how you want your addresses to look (font, color, size & more)
- Preview each address on your envelope
- Save your address lists to use on future orders
NOTE: metallic colors are not available for recipient addressing
$0.75 / address
$0.50 / address
$0.35 / address
$0.30 / address
$0.25 / address
$0.15 / address
$0.10 / address
*requires a $25 setup fee
More About This Product
About this Product
- Direct Mail
- Greeting Cards
- Personal Correspondence
|Mill||Mohawk Fine Papers|
|Size||A7 - 5 1/4 x 7 1/4|
|Classification||Social & Invitation|
60 lb Text 89 G/M2 Caliper 4.9 408 PPI
Green Seal Certified Made Using Wind Power Processed Chlorine Free Recycled Content
|Paperator™ Color Value||
CMYK C = 0, M = 61.25, Y = 71.13, K = 0.54
RGB R = 253.63, G = 98.28, B = 73.22
|Printer Compatibility||Copiers (B&W) Inkjet Printers Laser Printers Offset Printing|
BriteHue Fluorescent Papers are easy to print on when following these simple hints. It is recommended to pre-test all printing procedures prior to press time to ensure the desired results are achieved.
Print BriteHue like any conventional uncoated paper. We recommend heat resistant, wax free in if you plan to follow lithography with xerographic or laser printing technologies.
Keep BriteHue products wrapped until the moment of printing. It is essential to let the paper acclimatize, for a minimum of 24 hours – longer during cold weather – in the press room while still wrapped in mill packaging. Keep Brite- Hue products covered during drying, between passes and prior to any finishing work. Pressroom conditions should be as close as possible to 70 degrees, and 40-50% relative humidity.
Varnish or aqueous coating is optional as a surface protector or to achieve varnish effects. Pre-test all varnishes or coatings for compatibility.
FOLDING AND SCORING:
For best results, 100lb. text papers and all cover weights should be scored before folded. Folds against the grain, gatefolds, and folds running throughout heavily inked areas should also be scored. As a general rule of thumb, the correct creasing channel is determined by multiplying the paper’s caliper by two and then add the width of the creasing rule. (Note each 1 pt. of rule equals .014 inch). Mohawk recommends a minimum 2 pt. rule for all scores both with and against the grain. Sometimes a wider score must be added – but too much width can be worse than too little, causing the sheet to fold unevenly on one side of the score rather than the center. A double, parallel score can be used to keep it straight.
BriteHue is suitable for all standard binding processes. It is important to plan for proper grain direction in all binding applications. Grain direction should run parallel to the spine for optimum results.
It is recommended to pretest foils to find the best release, time and temperature for the size of the foil stamp and color of foil for each specific job.
on all BriteHue items, subject to printer restrictions.