


Capitol Bond Bright white Envelopes - No. 10 Commercial (4 1/8 x 9 1/2) 24 lb Writing Perfect Laser 30% Recycled 25% Cotton Watermarked 500 per Box
Envelope printing services are available when viewing this page on a desktop computer
*requires a $50 setup fee
Matching Products
More About This Product
About this Product
Product Uses
- Business Proposals
- Corporate Identity Communications
- Direct Mail
- Letterhead
- Personal Correspondence
- Resumes
Specs
Mill | Neenah Paper |
---|---|
Brand | Capitol Bond |
Product Type | Envelopes |
Size | #10 Commercial - 4 1/8 x 9 1/2 |
Style | Regular/Commercial |
Classification | Business |
Flap Type | Commercial |
Paper Weight |
24 lb Writing
90 G/M2
Caliper 4.7
425 PPI
|
Finish | Perfect Laser |
Eco Features |
Alternative Fiber Paper
Green Seal Certified
Lignin Free
Recycled Content
|
Brightness | 96 |
Paperator™ Color Value |
CMYK
C = 10, M = 3, Y = 2, K = 2
RGB
R = 233, G = 234, B = 226
|
Cotton Percent | 25% |
Recycled Percentage | 30 |
Printer Compatibility | Inkjet Printers Laser Printers Offset Printing |
Printing Hints
Neenah Paper Capitol Bond
Capitol Bond Papers are easy to print on when following these simple hints. It is recommended to pre-test all printing procedures prior to press time to ensure the desired results are achieved.
OFFSET INKS:
Print Capitol Bond like any conventional uncoated paper. We recommend heat resistant, wax free ink if you plan to follow lithography with xerographic or laser printing technologies.
HANDLING:
Keep Capitol Bond products wrapped until the moment of printing. It is essential to let the paper acclimate, for a minimum of 24 hours – longer during cold weather – in the press room while still wrapped in mill packaging. Keep Capitol Bond products covered during drying, between passes and prior to any finishing work. Pressroom conditions should be as close as possible to 68 degrees, and 45-60% relative humidity.
VARNISH:
Varnish is optional as a surface protector.
FOLDING AND SCORING:
To properly score Capitol Bond, use a rounded channel score. It is recommended to use a minimum width of 2.5 times the caliper of the sheet to be scored, plus 28/1000” for the channel. Score with the grain, using a light letterpress score (not on-press litho-scoring) Use a minimum score width of 1 point, with 2 points preferred. Fold into the bead of the score.
BINDING:
Capitol Bond is suitable for all standard binding processes. It is important to plan for proper grain direction in all binding applications. Grain direction should run parallel to the spine for optimum results.
LASER AND INKJET GUARANTEED
on 20 and 24 lb Bond items.

Envelope Printing Services
Save time and let us print your envelopes. We can even address them for you! White ink and clear varnish also available.
Learn More