• Current Item
In Stock - Ships within 24 hrs (M-F)
SKU: 3-07-400-F-P

No rating

$59.97
+
Price + Services
250 sheets

Buy in Bulk and Save

  • 3 Packages (1 carton) 750 sheets
    20% Savings
  • 12 Packages (4 cartons) 3,000 sheets
    21% Savings + Free Shipping

More About This Product

About this Product

Via Felt Digital is made with i-Tone and is a fresh new look in everyday paper. First of all, it's got a gorgeous felt pattern. As in a traditional felt surface. Rich, velvety, with nap. So it looks good and feels good to the touch. Secondly, it's got heft. Substance. It's a solid sheet. Add to that a fresh new palette of fun colors, and you've got the new go-to paper. How does it print? Like a dream. Stable and reliable while printing: digital, laser printing, inkjet printing (laser and inkjet in writing and text weights up to 70lb.), offset - it's all the same to Via Felt. Plus Via Felt is an eco-warrior. It's made with 30% post consumer waste fiber (except Pure White), and is produced with wind-generated electricity. So let's see: Via Felt feels good, looks good, prints good, and makes you feel good. Man, that's good!

Product Uses

  • Business Cards
  • Greeting Cards
  • Menus
  • Report Covers

Specs

Mill Mohawk Fine Papers
Brand Via Felt
Product Type Card Stock
Size 18 x 12
Printer Compatibility Color Copy Copiers (B&W) Copiers (Color) DI Printers Digital Press HP Indigo Inkjet Printers Kodak NexPress Laser Printers Offset Printing Xerox iGen
Finish Felt
Coating Uncoated
Grain Direction Grain Short
Eco Features
FSC Certified Green Seal Certified Lignin Free Made Using Wind Power Processed Chlorine Free
Paper Weight
80 lb Cover 215 G/M2 Caliper 11.9 168 PPI
Brightness 94
Paperator™ Color Value
CMYK C = 0, M = 4, Y = 1, K = 0
RGB R = 255, G = 244, B = 251

Mohawk Via Felt Digital

Mohawk Via Felt Digital Papers are easy to print on when following these simple hints. It is recommended to pre-test all printing procedures prior to press time to ensure the desired results are achieved.

OFFSET INKS:

Print Mohawk Via Felt Digital like any conventional uncoated paper. We recommend heat resistant, wax free ink if you plan to follow lithography with xerographic or laser printing technologies. A slight increase in printing pressure may help the ink cover the texture well.

HANDLING:

Keep Mohawk Via Felt Digital products wrapped until the moment of printing. It is essential to let the paper acclimate, for a minimum of 24 hours – longer during cold weather – in the press room while still wrapped in mill packaging. Keep Mohawk Via products covered during drying, between passes and prior to any finishing work. Pressroom conditions should be as close as possible to 68 degrees, and 45-60% relative humidity.

VARNISH:

Varnish is optional as a surface protector.

FOLDING AND SCORING:

To properly score and fold Mohawk Via Felt Digital, use a rounded channel score with a 2 point rule and a 0.040” or 0.050” channel matrix. Score with the grain, using a light letterpress score for maximum control. On large projects with less stringent quality requirements on-press litho-scoring may be acceptable. Fold into the bead of the score.

BINDING:

Mohawk Via Felt Digital is suitable for all standard binding processes. It is important to plan for proper grain direction in all binding applications. Grain direction should run parallel to the spine for optimum results.

LASER AND INKJET GUARANTEED:

Via Felt Digital has Mohawk’s proprietary i-Tone surface treatment on digital sizes. Any toner based printer designed to run textured papers will be able to print on this sheet. The laser guarantee is extended to include paper after preprinting offset if the preprinting guidelines included here are followed.

PREPRINTING GUIDELINES:

Although newer digital color production presses can run a wide range of substrates, HP Indigo presses have particular substrate limitations that have traditionally been solved by using sapphire-treated papers. Mohawk’s i-Tone® process was developed to overcome these issues, improving both toner adhesion and blanket memory. It enhances print quality on the HP Indigo, the Kodak NexPress, and the Xerox iGen3™ Digital Production Press. Unlike Sapphire-treated papers, Mohawk i-Tone papers can be offset printed and then run through an HP Indigo press. Please consult your HP Indigo printer for specifications for the offset print run

PRINTING AND DESIGN:

Stationery and forms preprinted with ordinary ink will smear under the extreme heat and pressure of fuser rollers in high-speed copiers. In addition, improper handling and storage may cause jams. It is important to follow these standard industry practices when printing jobs that will be run through copiers and laser printers. Provide the copy/laser printing schedule to the offset printer, so that the job is planned correctly.

Discuss options if it is a tight turnaround. The ink manufacturer can provide inks for laser applications. The job will require oil-based heat- or thermal-resistant inks. Inks should withstand 400° Fahrenheit without smearing. Avoid metallic inks as the metallic flakes can build up on the fuser rollers. Fluorescent inks are also not recommended.

Minimizing ink and water on press should help reduce the possibility of wavy paper. Anti-offset powder or spray residuals can interfere with toner application and build up in the system, causing problems. Toner does not adhere well to heavily printed areas. The digital image should print directly onto the paper, avoiding an overlap of offset ink. If the job specifies an overprint of a preprinted solid area, use a halftone screen to achieve the desired color. If planning to imprint just one side of the preprinted form, print and pack so that the top (Felt) side is imaged. For two-sided copying, the bottom (wire) side should be imaged first. Note: Mohawk papers are packed Felt side up in cartons and reams. Care should be given when specifying relief processes, such as thermography, engraving, foil stamping, and embossing as they may damage your equipment and cause jams. Paper must be trimmed precisely, square, and with clean cuts. Improperly trimmed paper can misfeed and cause performance problems.

PACKING AND STORAGE:

Prevent tight plastic shrink-wrapping as it will curl edges and corners, leading to jams. Packing with chipboard is preferable. After wrapping, store preprinted material for 10 days before using to ensure completely cured ink and acclimated paper. Store at 50% relative humidity and 70° Fahrenheit.

ENVELOPES:

Testing the runnability of envelopes is recommended. Because of multiple paper thickness and variable envelope construction, we cannot guarantee performance once papers are converted into envelopes. Paper merchants can provide specific envelope samples for testing. Due to the large variety of equipment available for both offset and digital printing, we strongly recommend testing any paper before committing to a large program.

For more information and samples, please call Mohawk at 1 800 the mill. www.mohawkpaper.com

ADDITIONAL PAPER PRINTING APPLICATIONS:

Desktop Laserjet Printing, Laser Printing and Inkjet Printing, thermography, flexographic printing, letterpress printing, gravure printing, screen printing, foil stamping, engraving, embossing, die cutting, saddle stitching, perfect binding.

Paper Services

Choose from services including perforating, cutting, hole punching and scoring

Learn More
Back to Product
Via Felt Bright White Card Stock
Felt
Show Design
18" 12"
Larger View
Start Over

Select a Service to Get Started

Create your custom design using any or all of the tools below. NOTE: if needed, apply Cutting services first, before other services.

Service Added. Need to Add Another?

Add another service to your design from the tools below. Select a section on the left, then add the service. You can duplicate services between sections by cutting and pasting, or recycle scraps you don't need.

Services require a 2-4 business day lead time.
Paper with services included are not returnable for exchange or refund.

Not interested in paper services? Back to product

Complete Your Order

Confirm Services to Complete this Order

Via Felt Bright White Card Stock
Felt 18 x 12
250 per Package
Sheets
250 per Package

How many sheets will this template apply to?

  • sheets

Additional instructions:

250 Sheets 1 package
Total: 59.97
Price includes
Done Adding Services

Our Cutting Service

Let Us Make the Cut

Your paper will be cut with state-of-the-art paper trimming equipment operated by paper industry professionals who understand the details of your design. Specify any size. Our online cutting designs are exact. Cutting usually takes 2 - 3 days, but let us know if you have a tighter schedule.

Our Perforating Service

Make Your Paper a Working Tool

Whether you need return receipts, business cards or shelf-talkers, our online design is easy. Choose from 46 standard formats or order your custom dimensions on perpendicular edge-to-edge perforations. Perforating usually takes 3 - 4 days, but let us know if you have a tighter schedule.

Our Hole-Punching Service

Perfect Circles for Many Applications

Paper hole punching provides clean, crisp, circular holes for a variety of binding applications. Have us custom hole punch almost any paper available on The Paper Mill Store. Hole punching usually takes 2 - 3 days, but let us know if you have a tighter schedule.

Our Scoring Service

We Score It, You Fold It

Proper folding, without cracking, usually requires a nice crisp score to create a hinge for the paper to fold along. Have us custom score almost any paper available on the site. Scoring usually takes 2 - 3 days, but let us know if you have a tighter schedule.

Close

Are you sure you want to start over?

This will erase ALL added services from your current product.

Start Over
Cancel
Close
Applying your saved design...
Close

FREE SHIPPING on orders of $149 or more

Your cart is empty

Continue Shopping